Steps Involved in a Rain Gutters Olympia Installation Project

by | Apr 2, 2012 | Home Improvement

Are you familiar with the materials or even the steps for installing a rain gutter on your house? If your answer is no, then it is now the right time to do some research before attempting to get the job done. Getting hands on with the installation when you are not familiar with the steps can result in injuries. Alternatively, you can hire a professional rain gutters Olympia contractor to get the rain gutter installed for you.

Tools that You Need
Before we proceed further, you should know that there are various materials that can be used for the gutter, some of it being steel or even aluminum. No matter what material the gutter is made of, they are designed for one purpose – that is to capture any running water off your roof, and redirect it away from the foundation of your home. Some of the things that you may need for your rain gutters Olympia installation project include ladder, tape measure, chalk line, levels, screwdriver bits and power drill, and a hacksaw. On top of that, you will also need rust resistant screws, and also the parts for the rain gutter.

Designing the Gutter
With the purpose of the gutter in mind, you should design the gutter system. In order for the gutter to efficiently capture the water running off your roof, it should be positioned in a way that the edge of your roof is roughly over the middle of the gutter. After you have designed the system, take down the measurements of the system, as well as a listing of the materials and tools that you would need – then, it is time to go shopping!

Installing the Gutter
When installing the gutter, start at the end of the gutter, away from the downspout location – take the measurement, and put a mark as a guideline for the installation later. Use the chalk lines for reference when you are installing components. With the help of a ladder, install the components, the corners, as well as the drop outlets. Next, snap the individual sections of the gutter onto the hangers; then, join the sections with the help of the connectors. Install elbow as well as a short section of downspout to direct the water away from the foundation of your home to complete the installation.

Get Professional Help
The instructions may sound easy enough for a beginner to follow but keep in mind that you will need to buy the right materials and the right tools for the job. You will also need to be able to take the correct measurements for the gutter system. If in doubt, you can always hire a rain gutters Olympia professional service to help you get the job done.

Recent Posts



Related Posts